Decking and fencing Water well systems
Angielski

Gamrat

Research Laboratory

The Quality Centre Research Laboratory has implemented a management system compliant with the requirements of PN-EN ISO/IEC 17025:2018-02 since 1999 (Accreditation Certificate No. AB 237).

The scope of accreditation is available for download – Accreditation Scope No. AB 237. This is objective confirmation of the high standard of services related to the tests performed.

The Polish Centre for Accreditation is a signatory to the international ILAC MRA mutual recognition agreement (list of ILAC MRA signatories). Therefore, test results covered by the accreditation scope are recognized in all countries that are signatories to the ILAC MRA multilateral agreements.

As part of its activities, the accredited laboratory operating at Gamrat S.A. conducts tests of plastic materials. Based on these tests, the manufacturer or ordering party may issue a national declaration of performance confirming the compliance of construction products with the relevant technical specifications.

The laboratory performs the following accredited tests
  • resistance to dichloromethane PN-EN ISO 9852,
  • Vicat softening temperature PN-EN ISO 2507-1,2,3 and PN-EN ISO 306
    (excluding testing environments described in points 5.1.2 and 5.1.3),
  • longitudinal reversion PN-EN ISO 2505,
  • dimensions PN-EN ISO 3126,
  • changes after heating PN-EN ISO 580 and PN-ISO 12091,
  • ring stiffness PN-EN ISO 9969,
  • mechanical properties in tensile testing PN-EN ISO 527-1, 2, 3 and PN-EN ISO 6259-1,3
  • and ISO 6259-2,
  • tensile strength of butt welds ISO 13953,
  • oxidation induction time and temperature PN-EN ISO 11357-6,
  • resistance to external blows by falling weight method PN-EN ISO 3127,
  • resistance to slow crack growth PN-EN ISO 13479,
  • internal pressure resistance at constant temperature PN-EN ISO 1167-1,2,
  • melt mass-flow rate PN-EN ISO 1133-1,
  • density PN-EN ISO 1183-1,
  • joint tightness PN-EN ISO 13259, PN-EN ISO 13254, PN-EN ISO 13846, PN-EN ISO
  • 13844 and PN-EN ISO 13845,
  • pipe resistance to squeezing PN-EN 12106,
  • resistance to cyclic elevated temperature PN-EN ISO 13257,
  • volatile content PN-EN 12099,
  • resistance to external blows by staircase method PN-EN ISO 11173,
  • ring flexibility PN-EN ISO 13968,
  • sampling of products PN-83/N-03010 p. 3.4.
  • noise measurements PN-N-01307 and PN-EN ISO 9612, 

  • measurements of dust and harmful substances at workplaces PN-Z-04008-7,
    PN-91-Z-04030/05, PN-91-Z-04030/06.

  • testing of PVC, PE and PP pipes and fittings (including internal pressure resistance tests of thermoplastic pipes with diameters up to 800 mm),
  • testing of PVC-U gutter systems (gutters, fittings, downpipes) PN-EN 607, PN-EN 12200-1,
  • testing of hoses and flexible conduits PN-EN ISO 3994, PN-EN ISO 1402, PN-EN ISO 10619-1, PN-EN ISO 10619-2,
  • testing of soffit systems,
  • testing of WPC composite products PN-EN 15534,
  • testing of drainage sets for sanitary appliances (sanitary fittings, drainage sets for washbasins, bidets and bathtubs, traps, plugs) PN-EN 274-1,2,3,
  • testing of floor drains in buildings PN-EN 1253,
  • testing of anti-flood devices in buildings (backwater valves) PN-EN 13564,
  • testing of drainage pipes PN-C-89221,
  • testing of air admittance valves for drainage systems PN-EN 12380,
  • testing of raw materials for plastics production including PE, PP and PVC,
    Shore hardness PN-EN ISO 868,
    Charpy impact strength PN-EN ISO 179-1,
  • testing of gutter bracket load capacity PN-EN 1462,
  • tensile impact strength PN-EN ISO 8256,
  • resistance to slow crack growth (cone test) ISO 13480,
  • testing of welded joints (bend test) PN-EN 12814-1,
  • impact resistance PN-EN 12061,
  • maximum deformation under compression PN-EN 802,
  • determination of compressive properties PN-EN ISO 604,
  • determination of flexural properties PN-EN ISO 178,
  • handle strength testing PN-EN 12095.
  • measurements of daylight and electric lighting PN-83/E-04040.03,
  • analysis of water and wastewater,
  • assessment of energy expenditure.
Contact with the research laboratory

Agata Machowicz

Head of Quality Centre

Call+48 726 001 963
Email: lab@gamrat.com.pl

Downloads
pdf
2.07 MB
Katalog do pobrania